Stainless Steel Sheet Finish Nilai

Finishing : 1B

Available Size

Finishing : Hairline

Available Size
  Width (mm) Length (meter) Thickness (mm) 3.0 4.0 5.0 6.0 9.

Finishing : BA

Available Size

• Customized specific cut to length is acceptable.

Finishing : Mill Finish

Available Size
  Diameter Length (mm) 3/16″ x 3/16″ 6.0 1/4″ x 1/4″ 6.0 5/16″ x 5/16″ 6.0 3/8″ x 3/8″ 6.0 1/2″ x 1/2″ 6.0 5/8″ x 5/8″ 6.

Available Shape, Finishing and Size
  Shape Finishing Outside Diameter, OD (mm) Length (meter) Thickness (mm) 1.0 1.2 1.5 2.0 3.0 Round BA 9.5 6 ● ● ●     12.7 6 ● ● ●     15.

Finishing : 1B

Available Size
  Dimension (mm) Length (meter) Thickness (mm) 3.0 4.0 4.5 5.0 6.0 9.0 12.0 12 6.0 ●             15 6.

Super Mirror, No. 8 Stainless Steel Sheet

Standard, cold rolled
Super Mirror is high gloss polished finished with high degree of reflection which can be produced from 2B or BA finishes, also call No. 8.It is produced by fine abrasion and finishing with extremely fine buffering compound.

Sandblast Finish( Glass Bead ) Stainless Steel Sheet

Standard, cold rolled
Sandblast is produced by the impact of hard and inert glass bead onto the surface result in non directional with uniform matt surface. It has soft satin reflection and low reflectivity. Sandblast provides a clean, consistent and streak free finish.

Non Directional Finish Stainless Steel Sheet

Standard, cold rolled
Non Directional finish is obtained by polishing non directionally on the stainless steel  sheet.  It form a  non directional polishing patern on the sheet.

Hairline Finish Stainless Steel Sheet

Standard, cold rolled
Hairline is obtained by polishing line extend uniformly along the length of sheet. It is well defined directional finish with long and fine line.

BA Finish Stainless Steel Sheet

Standard, cold rolled
BA is the abbrevian of Bright Annealed, which is produced in a controlled atomsphere furnace. It is smooth, bright reflection finish, has a mirror-like appearance but may have some cloudiness and other imperfection. BA can be buffed to atain Super Mirror ( No. 8) which is much brighter than BA.

4B Finish Stainless Steel Sheet

Standard, cold rolled
4B is a smooth, moderately reflective cold rolled finish is produced by using  polished rolls.
It is the most economical and widely used stainless steel in industry.

2B Finish Stainless Steel Sheet

Standard, cold rolled
2B is a smooth, moderately reflective cold rolled finish is produced by using  polished rolls.
It is the most economical and widely used stainless steel in industry.